Future Phantom Mallet Putters
There are two putters in this product line, the Mallet and the Mallet 2. The difference between the two is that the shaft connects to the mallet head at almost the center for the Mallet 2, whereas for the Mallet putter the shaft connects closer to the heel.There is no shaft offset for either putter. As the product line name implies, these putters have a very futuristic and stylish look to them. Behind the flat putter face is a stainless steel back plate that has a five-line alignment configuration. Behind that is a semicircular bar which gives the putter its mallet shape.
It is obvious from simply looking at these putters that the weight has been redistributed to obtain a high moment of inertia, or MOI, which provides forgiveness on off-center hits. The putters come with the standard loft of 4 degrees and standard lie angle of 71 degrees, have no shaft offset, and are available in lengths of 34 and 35 inches. The Mallet 2 is only available in right-handed models. The materials used to produce the mallet heads are 661 aircraft aluminum with a stainless steel back weight, as mentioned above. Both putters retail for $300.
 |
